 Conveyor
level
|
750
to 1000 mm |
| Conveyor
flow direction |
Either
available left to right or right to left |
| Board
edge reference |
Front or
Rear available |
Conveyor
width adjustment
|
50 to 250
mm |
Speed
of conveyor
|
18m / min
( 50Hz ) |
Main
unit weight
|
Approx.
900 kg |
| Dimensions |
(W)1200
x (D) 900 x (H) 1200 mm |
Power
supply
|
85 to 265V
( match with world wide) |
Air
supply rate
|
0.4 to
0.7 Mpa |
| PC |
Include
PC and MO drive, DOS / VPC
OS: Windows NT/ Windows 2000 |
Monitor
|
Include
TFT Monitor (15 inches) |
Dimensions
of board
|
Min. 50
x 50 mm, Max.510 x 410 mm |
Thickness
of board
|
0.5 mm
to 5 mm |
Component
height
|
Above the
board: 50mm or less, Below the board: 50 mm or less |
Camera
|
Color CCD
camera ( Total Pixels : 0.38 Million |
| Light
source |
LED light
( White color ) |
| Inspection
method |
Pattern
matching |
Target
Defects
|
Missing
components, Wrongly mounted device, Part slip down ( Part Shift
), Solder shorts, Polarity, Bridges, Part color check. |
Target
components
|
Tip of
package ( 1005 size or more { choice 8mm frame size camera})
Diode, Connector, Tantalum capacitor, Transistor, SOP/ QFP/DIP
Electrolytic capacitor, DIP switch, etc. |
Make
test data
|
Manual
mode: Make a window at inspection point on Master PCB.
Data conversion (Option). |
Others
|
Repair
Station (Option)
Statistics data, Part library |
|
| |
Profile
